Power Lock Ultra provides the ultimate suction hold with a twist to lock suction technology. Items in this range also have a Thermobond rust-resistant finish.
Suction pad fixings avoid the need to drill holes or mess with glue or sticky pads, but it is not a permanent method of fixing. When applying a suction item for the first time please ensure all surfaces are clean and shiny, flat with no curvature and solid with no pinholes or cracks. Press each suction pad onto the surface as firmly as you can ensuring that all front facing areas of the pad are smoothed onto the surface with no visible air bubbles or gaps. If the suction pad has a tightening knob then press turn this in the correct direction whilst continuing to push the suction pad onto the surface. Once fixed please gently tug to ensure the item is secure and the suction pads have taken. Occasionally the suction pads may not take to a surface, if this happens then please re-position the item and try again. Sometimes it is not possible to see that the surface is damaged, porous, or slightly rough. We recommend the removal, cleaning and re-applying of suction products every 3-6 months depending on their location.
No posts found